About Us

Department of Electronics and Communication started functioning from the academic year 2002 along with the inception of this flagship Institute. Since, then the department has maintained highest standards in providing quality education in the field of Electronics and Communication. The department offers a 4-year UG Course in Electronics and Communication and a two-year PG Course in Internet of Things discipline.

The department is not only equipped with excellent infrastructure and state of art equipments to explore the technological advancement in the relevant field, its labs are also furnished with advanced hardware and software tools.

The Department follows a comprehensive curriculum as per the mandate of the affiliating University and gives a lot of emphasis on practical learning through its state-of-the-art high-end hardware and software labs.

The Department has unmatched computing facilities with two fully equipped computer labs with 10 Mbps internet connectivity preloaded with the latest Electronic Design and Automations tools for computer based electronic designs.

Experienced and highly qualified departmental faculty members endeavour to provide the very best of technical education through high end ICT supported classroom teaching and practical learning through Lab sessions, Trainings and Workshops on emerging technologies. To make the students Industry ready, the Department also facilitates constant interactions with the industry through regular Industrial visits and Expert Lectures. The Department has a separate Departmental Library, an advanced fully equipped Electronic Devices Lab, Digital System Design Lab, Microprocessor & Microcontroller Lab, Antenna Lab, VLSI Lab, Microwave Lab, IoT Lab, Project Lab, a spacious fully equipped audio-visual seminar hall & membership of professional society IETE. The department laboratories are well equipped in the state of art equipments, meeting all the requirements of the RGPV, the Technical University of the state and also additional equipments to impart beyond the syllabus.

B.Tech

Electronics & Communication is a combinative study of Hardware Equipments & Controlling Software, which are easily seen in day-to-day life. This UG course gives the scholar deep knowledge of hardware & software which can enable them to design & implement electronic circuit boards in real life to make the life of the people easy.

Fabricating of any piece of hardware requires three steps, namely: Designing, Simulation in Virtual Environment & Testing. In the course offered by Oriental College of Technology, Bhopal, scholars not only cover the relevant syllabus introduced by the university but also gains hands on practice of various competitive technologies being used in the industry so as to impart the knowledge gained in the advent of new technologies.

Course Mode : Full Time	Course Duration : 4 Years	Seats : 60	Entrance Exam : JEE Main exam
Eligibility : Based on candidates performance in JEE Mains, on All India Level. Passed 12th examination with Maths. Min. 45% Marks in PCM for General, 40% Marks in PCM for SC/ST/OBC. Min. 45% Marks in Diploma Engg. for General, 40% Marks in Diploma Engg. for SC/ST/OBC.

M.Tech

M. Tech. in Internet of Things focuses on both theoretical and practical exposure to the students in the field of communication and networking areas. There are many job opportunities in manufacturing industries and service organizations such as broadcasting, consulting, data communication, entertainment, research & development and system support.

This program aims at producing trained professionals who can successfully meet the demands of fast-growing various industries like manufacturing, agriculture, finance, hospitality. The course is designed to train the students with good scientific and engineering breadth, including proficiency in software language and use of latest software tools so as to comprehend, analyze, design and create novel products and solutions for the real-life problems in the field of satellite, mobile, radio waves, networking, optical and wired data communication systems.

Course Mode : Full Time	Course Duration : 2 Years	Seats : 30	Entrance Exam : Not Applicable
Eligibility : Candidates should be Indian nationals. Candidates should be graduate in Engg./ Technology with minimum 50% marks. For those belonging to SC/ ST/ OBC (excluding creamy layer) categories of Madhya Pradesh need minimum 45% marks in their graduation, a minimum of 45% marks in their graduation.

Our Vision

To become a pioneer in Electronics & Communication Engineering by providing quality, skilled, socially responsible, and innovative engineers.

Our Mission

Impart quality education and a supportive environment to enable the students to face the challenges in Electronics and Communication Engineering.
Enable students with skills to solve complex technological problems by applying the concepts of mathematics, science, and engineering fundamentals by promoting collaborative and multidisciplinary activities.
Establish a noble learning ambiance that enables students to raise their innovation skills.
Inculcate teamwork, lifelong learning, and ethical properties to meet the expectations of the industry and society.

Program Educational Objectives (PEOs)

Graduates will be,

Able to solve technological problems using fundamentals of mathematics and engineering sciences.
Able to design and develop interdisciplinary and innovative Electronics & Communication systems using modern tools for the betterment of society and the environment.
Receptive to new technologies, attain professional competence through lifelong learning, and interact sensibly with society by applying ethical principles.

Program Specific Outcomes (PSOs)

Graduate will be able to :

Analyze and design Electronics & Communication system in the domain of Communication Systems, Antennas, Signal Processing, and Microcontroller & Embedded system using acquired analytical knowledge and applying the modern tools.
Implement the knowledge of Microprocessor, VLSI & Internet of things to resolve societal, environmental, health and safety issues.

Software Laboratory Facilities

The Department of Electronics and Communication Engineering of Oriental College of Technology is well equipped with computer labs. The labs are fully equipped with systems and latest software with an environment to implement and experiment knowledge acquired in the classroom. All the systems have internet facility. Following software are available in the labs:

S. NO.	Name of Software	Utilization / Application Area
1	Circuit Maker	Electronic Circuit Design and Simulation
2	Multisim	Electronic Circuit Design and Simulation
3	Tina-Ti	Electronic Circuit Design and Simulation
4	ESim	Electronic Circuit Design and Simulation
5	Proteus	Electronic Circuit Design and Simulation, PCB Design
6	DipTrace	PCB Design
7	Arduino IDE	IoT, Arduino based project design
8	Electric	IC Schematic and Layout Design Analysis
9	Xilinx ISE 9.2i	VLSI Design and Simulation
10	ModelSim SE	Simulation of VHDL / Verilog Code
11	Keil IDE	8051 Microcontroller Programming
12	EMU 8086	8086 Microprocessor Programming
13	MATLAB	Design and Simulation for Signal Processing, Control Systems, Image Processing
14	SCILAB	Design and Simulation for Signal Processing, Control Systems, Image Processing

Hardware Laboratory Facilities

The Department of Electronics and Communication Engineering of Oriental College of Technology is well equipped with the program specific hardware labs. These labs facilitate the learners to perform the hands-on experiments to cope up the curriculum objectives as well as to acquire additional practical practice. Following are the various programs whose labs are equipped in the institute:

Digital System Design
Electronic Devices
Analog Communication
Analog Circuit
Microprocessor and its Applications
Digital Communication
Communication Network and Transmission Line
Antenna and Wave Propagation
Microcontroller and Embedded System
VLSI Design
Microwave
IoT Lab
Optical Fiber Communication

Centre of Excellence Facilities

CoE VLSI Design
The Department of Electronics and Communication Engineering of Oriental College of Technology is well equipped with Xilinx ISE Design Software which is a leading EDA and Intelligent System Design provider. This centre enables the students and faculties an excellent facility to build great projects that connect their innovative ideas. This software offers design and verification tasks that include VLSI Front End designing. It uses Schematic and HDL languages to describe a design. It includes simulation, generation of netlist, static timing analysis, etc. VLSI Design is an exciting area for Research or Product Development.

CoE Internet of Things
The Department of Electronics and Communication Engineering of Oriental College of Technology is well equipped with Arduino controller based IoT Kits. This centre facilitates the students and faculties an excellent facility of Innovation & Research, Ideas to Prototypes & Products & Talent Transformation. The CoE IoT highlights the growth & development of tech-driven solutions for achieving the digital transformation. It can enable the institute to:

build industry capable talent
start-up community
entrepreneurial ecosystem for IoT
provide training and learning (including internships) both online and offline

CoE Antenna and Wave Propagation
The Department of Electronics and Communication Engineering of Oriental College of Technology is well equipped with CoE AWP Lab. The purpose of the CoE AWP Lab is focused on the analysis and design of antennas for microwave and millimeter applications. The lab provides antenna design and simulation facilities using the CST and HFSS software. The hardware setup helps the learners to understand the behaviour of different types of antennas.

Other Facilities

Seminar Hall: A dedicated Seminar Hall with a capacity for 150 people and is equipped with Audio/ Video/ Internet facilities/ACs and Projection.
Departmental Library: A dedicated departmental library with over 220 volumes and access to International Journals and Periodicals for students and Staff. Departmental Library with access to Reference Books and Journals.
Multimedia Projectors: For presentations in labs and classrooms.
Project Lab: For designing PCB, Circuit simulation & IoT based project.
Well-furnished classrooms & tutorial rooms.

Facilities

Computer Network Lab

Microwave Engineering Lab

Optical Fibre Lab

Micro Processor lab

Computer Lab

Electronic Devices Lab

Analog & Digital Communication Lab

Television & Radar Lab

VLSI & IoT Lab

An ability to apply knowledge of mathematics, science and Engineering.
An ability to design and conduct experiments as well as to analyze and interpret data.
An ability to design a system , component or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability and sustainability.
An ability to function on multidisciplinary teams.
An ability to identify, formulates, and solves electronics and communication engineering problems.
An understanding of professional and ethical responsibilities.
An ability to communicate effectively.
The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental and social context.
Recognition of the need for, and an ability to engage in lifelong learning knowledge of contemporary issues.
An ability to use the techniques, skills, and modern engineering tools necessary for electronics and communication engineering practice.

Student Achievement

Faculty Achievement

List of SCI / Scopus Publications

SN	Author Name	Title	Journal Name	Category	Publication Year
1	Dr. Nikita Shivhare	Climate change forecasting using data mining algorithms	AQUA — Water Infrastructure, Ecosystems and Society	SCIE	2023
2	Mr Amish Kumar Jha	Additive manufacturing substrate for patch antenna using variable infill Poly Lactic acid	AEU-International Journal of Electronics & Communications	SCIE	2023
3	Dr. Nikita Shivhare	Modelling suspended sediment concentration and discharge relationship using neural network and adaptive neuro-fuzzy inference system	Arabian Journal of Geosciences, Springer	SCIE	2022
4	Dr Sandeep Garg	Impact of Silicon Stacked Transistors on Nano Scale Domino Logic	Silicon, Springer, 2022	SCIE	2022
5	Dr. Nikita Shivhare	Identification of soil erosion-prone zone utilizing geo-informatics techniques and WSPM model	Sustainable Water Resources Management –Book Chapter, Springer	SCIE	2022
6	Dr Prabhat Sharma	Implementation of Efficient Security Algorithm and Performance Improvement Through ODMRP Protocol in VANET Environment	Wireless Personal Communications	SCIE	2022
7	Dr Sandeep Garg	Diabetic Patient Monitoring & Controlled using IoT Based & Machine Learning System	Journal of Harbin Institute of Technology	Scopus	2022
8	Dr Sandeep Garg	Blood Banking Via Cloud Computin Using Machine Learning Tracking the Blood Donor Location at Real Time	Journal of Harbin Institute of Technology, 2022	Scopus	2022
9	Dr Sandeep Garg	Live Reporting and Monitoring of Intelligence Infant Disease Prediction	Computer Integrated Manufacturing Systems	Scopus	2022
10	Mr Gaurav Morghare	Wideband Spectrum Compressive Sensing Technique in Cognitive Radio Networks	ICCCT	Springer	2022
11	Dr Shilpam Saxena	Antenna-Filter Integration for Wireless Applications	ICTACS- IEEE	Scopus	2022
12	Ms Vasundhara Shukla	Speech Enhancement Using VAD for Noise Estimation in Compressive Sensing	Data, Engineering and Applications, Springer	ESCI	2022
13	Dr. Nikita Shivhare	Modelling of Daily Suspended Sediment Concentration Using FFBPNN and SVM Algorithms	SCCE	Scopus	2021
14	Dr Khushboo Pachori	Sustainable circular supplier selection and evaluation in the manufacturing sector using Pythagorean fuzzy EDAS approach	Journal of Enterprise Information Management	Scopus	2021
15	Dr. Md Ahmed	Pipelined FPGA prototyping of Digital Video Stabilization System for Real time implementations	IJEET	Scopus	2021
16	Dr Nikita Shivhare	Study of Methods Available for Groundwater and Surface water Interaction: A Case Study on Varanasi, India	Earth and Environmental Science-Book Chapter	Springer	2021
17	Mr Rishi Sharma	Review of Image based concrete crack detection	ICATME- IEEE	Scopus	2021
18	Dr Abhishek Sharma	MRI denoising using advanced NLM filtering with non-subsampled shearlet transform	Signal, Image and Video Processing	SCIE	2021
19	Dr Sandeep Garg	A 4:1 multiplexer using low-power high-speed domino technique for large fan-in gates using FinFET	Circuit World	SCIE	2021
20	Dr Shilpam Saxena	Planning of formwork materials	Materials Today: Proceeding	SCOPUS	2021
21	Dr Mayur Shukla	Microwave-assisted alumina-zirconia brazed joint for microwave tubes	Journal of the Australian Ceramic Society	SCIE	2020
22	Dr Sandeep Garg	SCDNDTDL: a technique for designing low-power domino circuits in FinFET technology	Journal of Computational Electronics- Springer	SCIE	2020
23	Dr Shilpam Saxena	Novel Triple-Band Antenna for Wireless Communication	SPIN- IEEE	SCOPUS	2020
24	Dr Shilpam Saxena	Triple Band Antenna For WLAN/WiMAX Applications	Materials Today:Proceedings	SCOPUS	2020
25	Dr Shilpam Saxena	Deviations in design of residential buildings	Materials Today	SCOPUS	2020
26	Dr Shilpam Saxena	Novel Filtenna for wireless applications	Materials Today	SCOPUS	2020
27	Dr Sandeep Garg	A 4:1 Multiplexer using dual chirality CNTFET based domino logic in nano-scale technology	International Journal of Electronics	SCIE	2020
28	Dr Nikita Shivhare	Estimation of behavioral change of SSC of bed profile in the river using ADCP	Arabian Journal of Geosciences	Scopus	2020
29	Ms Mraduraje Sisodiya	Trust based Mechanism using Multicast Routing in RPL for the Internet of Things	CICN	Scopus	2020
30	Ms Mraduraje Sisodiya	Improved Mobility Aware Energy Efficient Routing Protocol for Link Recovery in Internet of Things	CICN	Scopus	2020
31	Dr Sandeep Garg	FDSTDL: Low‐power technique for FinFET domino circuits	International Journal of Circuit Theory and Applications	SCIE	2019
32	Dr Sandeep Garg	A 1-bit full adder using CNFET based dual chirality high speed domino logic	International Journal of Circuit Theory and Applications	SCIE	2019
33	Dr Sandeep Garg	A New Technique for Designing Low-Power High-Speed Domino Logic Circuits in FinFET Technology	Journal of Circuits, Systems, and Computers	SCIE	2019
34	Dr Abhishek Sharma	Two Stage MRI De-noising using NLM with Bitonic Filtering	International Journal of Engineering and Advanced Technology	Scopus	2019
35	Dr Abhishek Sharma	Noise removal of MRI images with different similarities using advance NLM filtering	International Journal of Recent Technology and Engineering	Scopus	2019
36	Dr Abhishek Sharma	A review on magnetic resonance images denoising techniques	Advances in Intelligent Systems and Computing	Scopus	2019
37	Dr Sandeep Garg	Low leakage domino logic circuit for wide fanin gates using CNTFET	IET Circuits, Devices & Systems	SCIE	2019
38	Dr Sandeep Garg	Very Low Power Domino Logic Circuits Using Carbon Nanotube Field Effect Transistor Technology	Journal of nanoelectronics & Opto electronics	SCIE	2019
39	Dr Nikita Shivhare	Use of soil and water assessment tool for sediment modelling	Indian Journal of Environmental Protection	Scopus	2019
40	Dr Nikita Shivhare	ARIMA based daily weather forecasting tool: A case study for Varanasi	Mausam	SCIE	2019
41	Dr Nikita Shivhare	Identification of critical soil erosion prone areas and prioritization of micro-watersheds using geoinformatics techniques	Elsevier	SCIE	2018
42	Dr Sandeep Garg	Low power domino logic circuits in deep-submicron technology using CMOS	Engineering Science & Tech, an International Journal	SCIE	2018
43	Dr Nikita Shivhare	A Comparison of SWAT Model Calibration Techniques for Hydrological Modeling in the Ganga River Watershed	Elsevier	SCIE	2018
44	Mr. Amish Kumar Jha	Iterative Analysis of Dielectric Constant of Patch Antenna Substrate at UHF Band	International Journal of Engineering & Technology	Scopus	2018
45	Dr. Mayur Shukla	In vitro evaluation of bioactive glass ceramic coating for application on Ti6Al4V based biomedical implants	Journal of Non-Crystalline Solids	SCI	2018
46	Dr. Mayur Shukla	Enhanced bioactive glass-ceramic coating on Ti6Al4V substrate by microwave processing technique for biomedical applications	Materials Letters	SCI	2018
47	Dr. Mayur Shukla	Analysis of interfacial joint strength of microwave and conventionally brazed alumina ceramic joints using scratch test method	Materials Today: Proceedings	SCI	2018
48	Dr Abhishek Sharma	Improved denoising technique for medical MRI Brain Images	IEEE Conference	Scopus	2018
49	Dr Nikita Shihvhare	Hydrological Planning of watershed of RGSC, Mirzapur, UP, using GIS Techniques	Springer	SCIE	2017
50	Mr. Amish Kumar Jha	Design and Analysis of KUBAND Microstrip Rectangular Patch Antenna	IEEE Conference	Scopus	2017

List of IEEE Publications

SN	Author Name	Title	Journal Name	Category	Publication Year
1	Mr Gaurav Morghare	An Effective Approach for Cognitive Radio Wideband Spectrum Compressive Sensing over AWGN/Rayleigh Channels	SPIN	IEEE	2023
2	Dr Nikita Shivhare	Recent Progress in MEMS Based Acoustic Vector Sensor for Underwater Applications	ICEEIE	IEEE	2021
3	Dr Nikita Shivhare	Study Of Types of Road Abnormalities and Techniques Used for Their Detection	ICEEIE	IEEE	2021
4	Dr. Prabhat Sharma	Review of VANET Challenges and Protocol for Architecture Design and Intelligent Traffic System	International Conference on Data, Engineering and Applications	IEEE	2020
5	Mr. Amish Kumar Jha	Technique of Material Design for Patch Antenna Substrate Using Frequency Dependent Material Setup	IEEE Comference	IEEE	2020
6	Ms Urmila S. Soni	Control Strategies in Droop Controller of MicroGrid: A Survey	ICSEDPS	IEEE	2018
7	Mr Akhielsh Jain	Secure Data and Image for Hybrid Steganography and Watermarking Technique for Different Image File Format	ICRIEECE	IEEE	2018

List of Non SCI Publications

SN	Author Name	Title	Journal Name	Category	Publication Year
1	Mr Lalit Jain	Design and Investigation of Helical Antenna in End fire mode for S band Application	High Technology Letters	Non SCI	2022
2	Dr Sandeep Garg	Low-Latency and Area Analysis of Polar Encoding and Decoding using Xilinx Software for 5G System	High Technology Letters	Non SCI	2022
3	Dr Sandeep Garg	Design and Performance Analysis of High Speed Digital Approximate Multiplier for AI-VLSI Applications	High Technology Letters	Non SCI	2022
4	Dr Sandeep Garg	An Efficient IoT based Healthcare Data Management and Transfer using Blockchain Technology	High Technology Letters	Non SCI	2022
5	Dr Sandeep Garg	In Healthcare, enhance the performance assessment of labeled compounds diabetes detection with K-means algorithms	International Journal of Biology Pharmacy and Allied Sciences	Non SCI	2021
6	Dr Nikita Shivhare	Utilizing SWAT for Surface water discharge Modeling: a case study of a watershed in Ganga basin	IDEA 2019	Non SCI	2019
7	Mr Akhilesh Jain	Time and Area Efficient 2-D DWT using Multiplier-less Canonic Signed Digit Technique	IJRTE	Non SCI	2019
8	Dr Shilpam Saxena	A design of reconfigurable antenna using novel DGS with PIN diode for reducing adverse effects of Co-site Interference and Jamming	International journalof Pure and applied mathematics	Non SCI	2017

Patent Published / Granted

SN	Faculty Name	Designation	Title	Application Number	Date
1	Dr Nikita Shivhare Mitra	Associate Professor	Motorized Water Sampler for Water Bodies	202031050722	23-Nov-20
2	Dr Prabhat Sharma	Asst. Professor	A Method for Adaptive Communication Between Smart IOT Devices in 5G Communication Platform	202111003754	12-Feb-21
3	Dr Sandeep Garg	Professor	Low Noise High Speed Domino Logic Desin in Deep Submicron CMOS	2021105324	11-Aug-21
	Mr. Lalit Jain	Assistant Professor
	Mr. Akhilesh Jain	Assistant Professor
4	Dr Sandeep Garg	Professor	Child Health Status monitoring System Using IOT	202121032911	20-Aug-21
5	Dr Khusboo Pachori	Professor	Centralized Health Monitoring System Using Convolution Neural Network	202121034968	27-Aug-21
	Dr Nikita Shivhare Mitra	Associate Professor
	Divya Rai	Asst. Professor
6	Dr Khushboo Pachori	Professor	COVID-19 Outbreak Analysis and Prediction with Deep Learning and AI Based	202141045772	22-Oct-21
7	Dr.Mohammed Ahmed	Asst. Professor	Machine Learning Algorithm based automatic Sign Language Recognition System for Digital Hardware Implementation	202141047829	29-Oct-21
8	Dr. Nikita Shivhare	Associate Professor	Electronic Glove For Women Saftey	352738-001	08-Nov-21
8	Dr Divya Rai	Assistant Professor	Electronic Glove For Women Saftey	352738-001	08-Nov-21
9	Mohammed Ahmed	Asst. Professor	Cloud and IOT Based Implemntation of Intelligent E Mirror System Using Python Language	202141049776	26-Nov-21
10	Sanjay Kumar Khadagade	Asst. Professor	A Machine Learning Method for Detecting Human Touch for Controlling and Minimize Corona Virus	202121054072	03-Dec-21
11	Gaurav Morghare	Asst. Professor	Designing Wireless Sensor Networks by Implementing Optimization Techniques	202211009477	11-Mar-22
12	Gaurav Morghare	Asst. Professor	An Image Processing Based Technique to help HR Predict the Pulse of Working Environment	202241008813	04-Mar-22
13	Akhilesh Jain	Asst. Professor	An Apparatus & system for denoising signals using wavelets	202221030720	28-May-22
14	Dr Sandeep Garg	Professor	Intelligent Diabetes monitoring and alert system	202121031549	14-Jul-21
15	Dr Abhishek Sharma	Associate Professor	Method For Automatic And Efficient Mr Images Denoising Using Densenet And Advanced NLM Filtering	202221023937	22 April 2022
16	Dr Shilpam Saxena	Professor	Electrical vehicle charging station with power management	202221008336	17-Feb-22

Books Published

SN	Faculty Name	Title	Published By
1	Dr Nikita Shivhare	Runoff Estimation and watershed management of small catchment	Lambert
2	Dr Nikita Shivhare	The Performance of IoT Node for 5G Communication Applications	Lambert

Departmental Activities

2022-2023

SN	Course Code	Course Name	Action Taken & Date	Resource Person/Faculty Member
1	EC303, EC304	Electronic Devices. Digital System Design	Value Added Workshop on Basic Electronic Components & their Applications, 7-12 Nov, 2022	Mr. Piyush Jain, OCT
2	EC701	Microcontroller & Embedded system, VLSI Design	Industrial Visit to CRISP. Bhopal ( MSME), 10-Oct-22	Dr. Mayur Shukla, OCT
3	EC303, EC304	Electronic Devices. Digital System Design	Workshop on Multisim, 19-Sep-22	Mr. Akhilesh Jain, ,OCT
4	EC303, EC304	Electronic Devices. Digital System Design	Value Added Workshop on PCB Designing ( Internship), 22-08-2022 (60 Hours)	Mr. Abhigyanam Giri, Director, Indeyes Infotech, Pvt. Ltd., Bhopal, Mr. Lalit Jain, OCT
5	EC701	Microcontroller & Embedded system, VLSI Design	Workshop on VHDL, 9-10 Nov 2022	Dr. Sandeep Garg, OCT
6	EC703(B)	Internet of Things	Workshop on Internet of Things 10th September, 2022	Mr. Sudesh Morey, Managing Director, Drmz System Innovations Pvt. Ltd.
7	EC-506	MATLAB Programming	Workshop on Simulink (MATLAB), 4-5 Nov. 2022	Mr. Akhilesh Jain, OCT
8	EC-501	Microprocessor and its Applications	Value Added Course ( Workshop) Arduino Programming, 14-18 Nov 2022	Mr. Amish Kumar Jha, OCT
9	EC601	DSP	Expert Talk on “Workshop on AI & Machine Learning” dated 03-Feb-2023	Mr. M. M. Farooqui, Software Engg., SOFTCON India, Pvt. Ltd
10	ES401	Energy and Environmental Engineering	Visit to "SunCarrier Omega Pvt Ltd , Raisen road Bhopal" dated 20-Mar-2023	Mr. S. S. Gadre, Senior Engineer, Sun Carrier Omega Pvt Ltd
11	EC402	Control Systems	Value addition workshop on "PLC Programming For Industrial Applications" on 10-14 April, 2023	Mr. Piyush Jain, OCT, Bhopal
12	EC805	Major Project-II	Expert Talk on “PCB Designing” dated 20-Mar-2023	Mr. Abhigyanam Giri, Indeyes Infotech Pvt. Ltd
13	EC601	DSP	Expert Talk on “Basics of Python required in IoT Industry” dated 20-April-2023	Mr. Aryan Sharma, Wipro Technologies
14	EC 604	Microcontroller and Embedded Systems	Short Term Training Program on “Embedded System” 15-Mar-2023	Mr. Rahul Rana, Appin Technologies Pvt. Ltd.

2021-2022

SN	Course Code	Course Name	Action Taken & Date	Resource Person/Faculty Member
1	EC604 (A), EC701	Microcontroller & Embedded system, VLSI Design	Industrial Visit to CRISP on 07-Jan-2022	Dr. Mayur Shukla, OCT, Bhopal
2	EC404	Control System	Value addition workshop on "PLC Programming For Industrial Applications" on 07-30, Sep 2021	Mr. Piyush Jain, OCT, Bhopal
3	EC402, EC404	Signals and Systems, Control Systems	Industrial Visit to “Regional Science Centre, Bhopal” dated 15-Mar-2022	Dr. Mayur Shukla, OCT, Bhopal
4	EC601, EC703(B)	DSP, IoT	Expert Talk on “Basics of Python required in IoT Industry” dated 17-Apr-2022	Mr. Aryan Sharma, Wipro Technologies
5	EC404	Control Systems	Industrial Visit to Aartech Solonics dated 26/03/2022	Mr. Mayur Shukla OCT, Bhopal
6	CRT	Campus Recruitment Training	Alumni Talk on “Career in IT Industry” dated 12-Apr-2022	Mr. Chandrashekhar Yadav, Senior Software Engineer, Global Payments Pvt. Ltd. Pune.
7	Software Testing	Basics of Software Testing	Alumni Talk on “API Testing & Future as Test Engineer” dated 16-Apr-2022	Mr. Animesh Nandan, TCS, Hyderabad
8	EC-703(B)	Internet of Things	Value Added Course on “ Applications of IoT” dated 11-13 October, 2022	Mr.Amish Kumar Jha, AP, OCT, Bhopal, Mr. Pradeep Patel, AP, OCT, Bhopal, Mr. Abhigyanam Giri, Director, Indyes Infotech, Bhopal
9	EC706	Major Project - I	Expert Talk on “Cyber Law and Ethics” dated 12-Nov-2021	Ms. Sapana Chowdhury, Advocate
10	EC502	Digital Communication	Industrial Visit to “India Meteorological Department (IMD), Bhopal”, on 24-Sep-2021	Mr. Pradeep Patel, OCT, Bhopal
11	EC706	Major Project-I	Seminar on “Innovation in field of energy conservation” On 16-Dec-2021	Mr. Ankit Gupta, Managing director, THE BRAIN SEEDER TBS INITIATIVES PVT.LTD
12	EC501	Microprocessor & its Applications	Expert Talk on “Arm Architecture of energy conservation” On 18-Nov-2021	Mr Harsh Shah, Staff Engineer, ARM, Bangalore
13	EC502	Digital Communication	Industrial Visit to “ All India Radio (AIR), Bhopal” dated 30-Nov-21	Mr. Lalit Jain
14	EC503(A)	Communication Network and Transmission Lines (CNTL)	Alumni Talk on “Career Scope in Data Network and Communication System” dated 04-Oct-2021	Mr. Ankur Khare- Sr Specialist, Wipro Ltd.

2020-2021

SN	Course Code	Course Name	Action Taken & Date	Resource Person/Faculty Member
1	EC 604	Microcontroller and Embedded Systems	Training Program on “Data Analytics for IoT ” dated 29-30 May 2021	Dr. Rita Jain & Er. Akansha Yadav
2	Software Testing	Basics of Software Testing	Expert Lecture on “Agile Methodology for Software Development” dated 16-Apr-2021	Ms. Ankita Baishakiya, IT Analyst, TCS, Indore
3	EC 604	Microcontroller and Embedded Systems	Short Term Training Program on “Embedded System” 15-Feb-2021	Mr. Rahul Rana, Appin Technologies Pvt. Ltd.
4	EC601	DSP	Expert Talk on “Workshop on AI & Machine Learning” dated 17-May-21	Mr. M. M. Farooqui, Software Engg., SOFTCON India, Pvt. Ltd
5	EC403	DSD	Expert Talk on “PCB Designing” dated 19-May-2021	Mr. Abhigyanam Giri, Indeyes Infotech Pvt. Ltd
6	CRT	Campus Recruitment Training	Alumni Talk on “Job Opportunities in Corporate World” dated 07-04-2021	Mr. Anirudh Bhardwaj, Lead Field Startegist, Amnesty International Co-founder, Toronto, Canada
7	CRT	Campus Recruitment Training	Expert Lecture on “Truth & Dare of Software Career” dated 05-Jun-2021	Mr. Mohan Murari, Deloitte, Hyderabad
8	EC 703(B)	Internet of Things	Value Added Workshop on “Recent Advances in Internet of Things” dated 28-29 Jul, 2020	Dr. Harishanker Srivastava, Associate Professor ECE Department CMRIT, Hyderabad, Dr. Rahul Thakur Assistant Professor CSE Department IIT Roorkee
9	EC-502, EC-503	Digital Communication, CNTL	Short-Term Training Program on “Advance Mobile Communication” on 17-21 Aug. 2020	Mr. Jitendra Kumar, Sofcon Training Pvt Ltd
10	EC 501	Microprocessor & Its Applications	Value Added Workshop on “PLC Programming for Industrial Applications” on 14-18 September 2020	Mr. Lalit Jain, OCT, Bhopal, Mr. Pradeep Patel, OCT, Bhopal, Mr. Amish Kumar Jha, OCT, Bhopal
11	EC 703(B)	Internet of Things	Workshop on “Applications of IoT” on 14-18 September 2020	Mr. Abhigyanam Giri, Indyes Infotech, Bhopal, Mr. Pradeep Patel, Mr. Amish Kumar Jha
12	EC706	Major Project - I	Workshop on “Design and Development of Electronic Projects” on 14-Dec, 2020	Mr. Lalit Jain, OCT, Bhopal
13	CRT	Campus Recruitment Training	Alumni Talk on “Career Guidance Cum Motivational Session” dated 23-Dec-2020	Ms.Nishi Aryan, Section Engineer, Ministry of Railways

2019-2020

SN	Course Code	Course Name	Action Taken & Date	Resource Person/Faculty Member
1	ES401	Energy and Environmental Engineering	Visit to "SunCarrier Omega Pvt Ltd , Raisen road Bhopal" dated 18-02-2020	Mr. S. S. Gadre, Senior Engineer, Sun Carrier Omega Pvt Ltd
2	CRT	Campus Recruitment Training	STTP on "Interpersonal Skill Development" dated 06, 07 June 2020	Mr. Jagdish Nagar, Resource Person, Azim Premji Foundation, Bangalore, Mr. Amit Charupa, Chief Operations Officer, ARCEUS Infotech Pvt. Ltd., Bhopal
3	EC8003	Radar Engineering	Tutorials on "Introduction of Vehicular Communication" dated 18-Jun-20	Prof. Prabhat Sharma, OCT, Bhopal
4	EC603	Data Communication	Expert Lecture on "Networking Essentials using CISCO Devices" dated 31-May-20	Mr. SubratoHowlader, Head Training, Kiki Center for Technonolgy, Gurugram, Haryana
5	EC403	Digital System Design	Workshop on "Complete PCB and Circuit Design" dated 09-Feb-2020	Dr. Sandeep Garg, OCT, Bhopal
6	ES401	Energy and Environmental Engineering, VLSI Design	Visit to "Aaartech ATAL Incubation Centre (AIC), Mandideep" dated 09-03-2020	Mr. Vaibhav Sharma, OCT, Bhopal
7	EC402	Control Systems	Training for Demonstration of PLC and SCADA dated 13-03-20	Mr. Akhilesh Jain, OCT, Bhopal
8	CRT	Campus Recruitment Training	Emerging Trends of Software Industry Dated 15-04-2020	Mr. Shubham Gupta, Manager, Publicis Sapient, UK
9	CRT	Campus Recruitment Training	Expert Lecture on “Managerial Skills” dated 07-Feb-20	Dr. P. K. Chopra, Director, Oriental College of Management, Bhopal
10	EC303, EC304	Electronic Devices. Digital System Design	Value Added Workshop on “PCB Designing” dated 26-30 Aug. 2019	Mr. Akhilesh Jain, Mr. Amish Kumar Jha
11	EC-501	Microprocessor and its Applications	Workshop on “Arduino and Its Application” dated 03-Sep-2019	Mr. Abhigyanam Giri and Mr. Rohit Kukreja, IndEyes Info Tech Pvt. Ltd
12	EC305	Network Analysis	Visit to “220KV Power Substation, Govindpura, Bhopal” dated 17-Sep-19	Ms. Vasundhara Shukla, OCT, Bhopal
13	EC7002	Satellite Communication	Work shop on “Various Challenges in VANET” dated 04-Nov-19	Prof. Prabhat Sharma
14	EC7004	Digital Image Processing	Workshop on “Neural Network” dated 19-Oct-19	Prof. Mahendra Choudhary
15	EC504(A)	Electromagnetic Theory	Visit to “FM Radio Centre Bhopal” dated 19-Aug-19	Dr. Nikita Shivhare

S.No.	Date	Topic
1.	7-Feb-20	An expert lecture on “ Arduino and Its Applications ”

B.Tech

Course Mode : Full Time	Course Duration : 4 Years	Seats : 60	Entrance Exam : JEE Main exam
Eligibility : Based on candidates performance in JEE Mains, on All India Level. 12th Pass out and Aggregate of 45% in PCM for General Category and 40% for SC/ST/OBC(excluding creamy layer) Candidate.

DESCRIPTION

Electronics & Communication is a combinative study of Hardware Equipments & Controlling Software, which are easily seen in day to day life. This UG course gives the scholar deep knowledge of hardware & software which can enable them to design & implement electronic circuit boards in real life to make the life of the people easy.

Fabricating of any piece of hardware requires three steps, namely: Designing, Simulation in Virtual Environment & Testing. In the course offered by Oriental College of Technology, Bhopal, scholars not only covers the relevant syllabus introduced by the university but also gains hands on practice of various competitive technologies being used in the industry so as to impart the knowledge gained in the advent of new technologies.

Training & Placement

Last Three Years Placement

M.Tech

Course Mode : Full Time	Course Duration : 2 Years	Seats : 24	Entrance Exam : Not Applicable
Eligibility : Candidates should be Indian nationals. Candidates should be graduate in Engg./ Technology with minimum 50% marks. For those belonging to SC/ ST/ OBC (excluding creamy layer) categories of Madhya Pradesh need minimum 45% marks in their graduation, a minimum of 45% marks in their graduation.